• Customer service in 3 languages
  • Over 46 million magnets in stock
The product was added to your shopping cart.
Go to shopping cart

Coloured magnetic tape 20 mm

magnetic strip for labelling and cutting, rolls of 1 m


Item number MT-20
Unit of Sale 1 meter
Price and rebate
1 m 2.50 CHF/m
from 3 m 2.15 CHF/m
from 10 m 1.85 CHF/m
from 20 m 1.70 CHF/m
from 40 m 1.50 CHF/m
Ask for a rebate from 240 m
incl. VAT plus shipping

2.50 CHF

incl. VAT plus shipping

Please select your desired model.

Please select

Amount in metres

  • Purchase on account

Description

This colourful magnetic tape is 20 mm wide and available in many different colours. It consists of strontium ferrite, the coloured front of the magnetic strip is laminated with PVC. The dark back of the tape is coated so it won’t stain and to protect it against abrasion. You can cut it to size with household scissors and label it with pencil, pen or whiteboard marker. The writing can be removed with alcohol, benzine or eraser, but some marks may remain. A waterproof felt tip marker is best suited for writing a permanent label on magnetic tape. You can find detailed information in our FAQ labelling. You can also print on magnetic tape using digital or screen-printing techniques. Please read our tips for printing on magnetic tapes.

Coloured magnetic tape is primarily intended for indoor applications. You could use it outdoors since it doesn’t rust, but over time it will become brittle and lose its colour due to sunlight exposure. So, if you decide on an outdoor application, expect to replace the coloured magnetic tape after a while. You can find additional information on our FAQ page about the characteristics of magnetic tapes

The writable magnetic tape will be delivered in rolls of 1 metre each. If you order 3 metres in yellow, for instance, you will receive three rolls of 1 metre each.

Please note

Magnets should not be placed on magnetic tapes because they would demagnetise those tapes. Suitable surfaces for magnets are ferrous strips and metal strips. Other holding surfaces can be found under surfaces for magnets.

Technical data

Article ID MT-20
Length 1 m
Width 20 mm
Thickness 1 mm
Magnetisation Anisotropic
Strength 80 g/cm²
Weight 74 g/m
PDF data sheet
The magnetic tapes are available in many different colours. They are anisotropically magnetised, which increases the adhesive force.
The small flux detector beautifully visualises the lamellar magnetisation. North and south poles alternate closely spaced. That leads to a higher adhesive force at direct contact with ferromagnetic surfaces.
Magnetic tapes are suitable for all sorts of labeling: By hand...
... with printed labels...
... or without writing, just as a colour code.
Fancy frame: Magnetic tapes can also add a stylistic note. On the top left the MT-20 was used, on the right the Coloured magnetic tape 10 mm and below the Coloured magnetic tape 40 mm.

However, that works only with paper or thin cardboard, because magnetic tapes are not designed for this type of use; they need direct contact with a ferromagnetic surface.